/primers/asp/article.php/3477891/ASP-Primer-Some-Basic-VBScript.htm ASP Primer: Some Basic VBScript

ASP Primer: Some Basic VBScript

By Joe Burns

Use these bookmarks to jump around the tutorial:

[The Dim Statement]

[The If .. Then Statement]

[The Case Statement]

[What's Next?]

In order to get started really making good use of ASP we will need to spend some time going over the most common programming components. If you are already quite adept at either VBScript or JavaScript, you can certainly skip past the next few installments of this series. If you are new to programming, however, stick with us and we'll walk you through everything that you need to know to get started.

The DIM Statement

So, what the heck is a DIM...and what DIM-wit came up with the name? Well, DIM actually stands for dimension and is a hold over from the original BASIC language. 

What DIM does is let the computer know what variables you are going to use. The computer needs to know what variables you will use in order to reserve some space for them.

DIM also has one other very important function.  When DIM is used in cooperation with OPTION EXPLICIT, it forces you to declare all variable that are used in your ASP page. While that may not sound like anything important, forcing you to declare all your variables keeps you from making typos, which makes debugging your code so much easier.

Here's how DIM works:

  DIM strName, intNumber, decNumber

Pretty simple, eh?  Now we have three variables declared: strName, intNumber, and decNumber.  The variables are now ready for use in you ASP page. 

Now here are some details you need to be aware of with regard to how VBScipt handles its variables. Unlike most other programming languages which require you to declare the variable name and type, VBScript does not require the variable type.

A variable type, logically enough, refers to the type of data the variable will hold.  In our example above, we declared a variable called strName.  strName is our variable we will use to hold string data, in this case, a person's name.

If you are new to programming, you may want to take a look at the table below that outlines some of the most basic data types. Most programming languages have many more data types than are listed below. For the purposes of learning basic programming, though, we will mainly concentrate on the data types listed.

String Holds a string of alphanumeric characters (numbers, letters, and symbols). An example of this would be someone's name, address, or telephone number.
Integer Holds whole numbers. (e.g. 1, 2, 3, 4, etc.)
Decimal Holds numbers with a decimal point (e.g. 16.42, 6.92456, etc.)

So, why even talk about data types if VBScript doesn't require me to declare them?

Well, knowing the different data types will allow you to better understand how you can manipulate the data. In VBScript there are many different built-in functions that will do a lot of your programming work for you. In order to use those functions you will need to know what kind of data is in the variable that you are performing the function on. For example, doing a square root function on our variable strName won't get you a useful result. It's kind of hard to take the square root of someone's name.

I'm sure that you noticed that each of the variables listed above has a prefix attached to it. That is my own little system for keeping track of what the data type is for each variable. I have found it to be very handy when debugging or adding to my code. The prefix quickly tells me that strName holds a string, intNumber holds and integer and decNumber holds a decimal. There is no set rule to this technique and you can use whatever naming method you like, however, making it something intuitive is always a good idea since you may not always be the person changing or updating the code.

Extra Hint:

Choose variable names that make sense. This will help you and anyone else that may read through your code to quickly and easily know what it is you are storing in the variable. In our example, strName tells you that a person's name will be stored in this variable. The variable names intNumber and decNumber, however, are far less informative and should be more descriptive.

back to top

The IF .. THEN Statement

And now on to bigger and better things, the IF .. THEN statement. This will probably be one of the statements that you use the most in VBScript.

The IF .. THEN statement is what is known as a conditional statement. In other words, when some condition is met (or not met for that matter) then something happens. Boiled down to its simplest form, that is programming in a nutshell. It is simply a series of events and responses to those events.

Let's take a look at how the IF .. THEN works:

  IF strName = "N/A" THEN

      strName = "Not Available"


In this case we are checking our string variable strName to see if it is set to "N/A". If it is set to "N/A" then we change it to say "Not Available" instead. You'll also notice that there is an END IF statement. That END IF tells the computer that you are done with the IF .. THEN statement and it can continue executing any other code. The computer knows to only execute the code between the THEN and the END IF if the condition you set is met.

So, what kind of comparisons can I do?

There are quite a few comparisons that you can make. Here they are along with the data types that they apply to:

= Equal to. You can use this to compare any data type.
< Less than. You can use this to compare any numeric data type. (You can also use it for string variable types as well but you will probably find that you never need to except when comparing dates.)
<= Less than or equal to. You can use this to compare any numeric data type. (You can also use it for string variable types as well but you will probably find that you never need to except when comparing dates.)
> Greater than. You can use this to compare any numeric data type. (You can also use it for string variable types as well but you will probably find that you never need to except when comparing dates.)
>= Greater than or equal to. You can use this to compare any numeric data type. (You can also use it for string variable types as well but you will probably find that you never need to except when comparing dates.)
<> Not equal to. You can use this to compare any data type.

When using the comparison operators above always remember to put string comparisons in quotes like in the example above. Numeric comparisons, like you will see below, do not use quotes.

So, what if I wanted to make more than one comparison? Do I have to list one IF .. THEN after another?

That's where ELSEIF comes in. ELSEIF allows you to string several comparisons together. Here is an example:

  IF intScore > 90 THEN

      strGrade = "A"

  ELSEIF intScore > 80 THEN

      strGrade = "B"

  ELSEIF intScore > 70 THEN

      strGrade = "C"

  ELSEIF intScore > 60 THEN

      strGrade = "D"


With the short section of code above you can easily see that we are assigning a grade based on someone's score. You can also see that ELSEIF works exactly like IF in that it makes a comparison the exact same way with comparison operators.

There is one very key difference to keep in mind, though. This type of IF statement is executed in sequence. In other words, if the first condition isn't met it moves on to the second condition. If the second condition isn't met then it will move on to the third condition. If the third condition is met it will execute the appropriate code which, in our case, is strGrade = "C". Once the code has been executed the computer considers itself done and doesn't even bother looking at the fourth condition. In our case that's exactly what we want it to do since we only need to assign one grade based on the score.

But what if I wanted to make 4 comparisons and have each one be considered regardless of the result of the comparison?

In that case you will have to create 4 separate IF .. THEN statements in order to be assured that each condition will be checked.

Now there is one more piece of the puzzle. If you noticed above there was no "F" grade. That's where ELSE comes in. ELSE is a sort of catch-all. It simply means that if none of the conditions before it are met then it will execute its code. Here's our revised IF .. THEN with ELSE included:

  IF intScore > 90 THEN

      strGrade = "A"

  ELSEIF intScore > 80 THEN

      strGrade = "B"

  ELSEIF intScore > 70 THEN

      strGrade = "C"

  ELSEIF intScore > 60 THEN

      strGrade = "D"


      strGrade = "F"


Now if the student didn't score at least 60 then they will receive and "F".

Make a Note ...

If you noticed, END IF is two words but ELSEIF is only one word. This is a little detail that trips up both new and seasoned programmers. You'll probably find yourself getting them switched more than once.

back to top

The CASE Statement

Now that you have an idea of how conditional statements work we'll throw out another one to you, the CASE statement. The CASE statement is very much akin to the IF .. THEN.

For our example of the CASE statement we're going to give you a practical example. Whenever possible we'll try to give at least one practical example with each segment of our primer series. Here's your practical example for this segment:

Use the code below to create an ASP page called nav.asp:


<% ' This example creates a form with a drop-down %>

<% ' menu. The user selects a page from the list and %>

<% ' clicks GO! to move from page to page. Each time %>

<% ' the user clicks GO! they are sent to a page named %>

<% ' nav.asp where their selection is evaluated by a %>

<% ' CASE statement. The CASE statement then %>

<% ' redirects the user to the appropriate page. %>

<% SELECT CASE Request.Form("Category") %>

<%   CASE "Home" %>

<%     Response.Redirect "index.html" %>

<%   CASE "About Me" %>

<%     Response.Redirect "about_me.html" %>

<%   CASE "About HTML" %>

<%     Response.Redirect "about_html.html" %>

<%   CASE "About ASP" %>

<%     Response.Redirect "about_asp.html" %>


Create a new HTML page with the code below or just cut and paste the form portion of the page into an existing HTML or ASP page:



      <TITLE>My Navigation Page</TITLE>



      <FORM METHOD="post" ACTION="my_page.asp">


        <FONT COLOR="#000080">

          Please select a page:</FONT>

        <SELECT NAME="Category" >
          <OPTION>About Me</OPTION>
          <OPTION>About HTML</OPTION>
          <OPTION>About ASP</OPTION>

        <INPUT TYPE="submit" VALUE="GO!"





Now here's how it all works. Once a user selects a page in the drop-down menu and clicks the GO! button they are redirected to a page called nav.asp. That page evaluates the user's request in a CASE statement and then forwards them on to the page that they requested. This all happens so quickly that the user probably will never realize they were sent to an intermediate page before arriving at the page that they requested.

Let's break down that CASE statement now. The first thing you see is SELECT CASE followed by what is to be evaluated. In this case, we are evaluating the information that is sent from the form on your HTML page. (Don't worry about the Request.Form or the Response.Redirect for now. We will get to those concepts later on in this series.)

Next we list out each possible match using CASE. In our example above we have 4 items in the drop-down menu. Therefore, we need to evaluate for those 4 items in our CASE statement. Beside each CASE is a possible match: "Home", "About Me", etc. Then below each CASE we have the instructions for what we want the computer to do. In this case we are telling our server to reroute the person to the page that they selected.

If the example above doesn't make sense to you consider this example using strGrade instead:

<% SELECT CASE strGrade %>

<%   CASE "A" %>

<P>Congratulations! You got an A!!!</P>

<%   CASE "B" %>

<P>Good Job! You got an B!</P>

<%   CASE "C" %>

<P>Not Bad. You got a C.</P>

<%   CASE "D" %>

<P>Well, Duh. You could do better than a D.</P>


The CASE statement above mixes VBScript and HTML on an ASP page. Depending on what grade the student received, the appropriate message is displayed on the page using standard HTML.

If the IF .. THEN and the CASE statement both get you the same result then why use CASE at all?

Well, CASE has a couple of advantages. It is a much more concise code which means less typing. It also is usually more intuitive than a very long series of IF .. THEN statements.

Feel free to plug in and adapt the code above to your pages. Depending on the circumstance, the example above can be a very handy solution for navigation problems.

back to top

What's Next?

Now that you have mastered declaring variables and some of the conditional statements we will move on to more VBScript concepts.

In the next part of this series we will:

  • Learn about FOR .. NEXT loops

  • Learn about DO loops

  • Learn about arrays

back to top

<< Previous | Next >>

  • Web Development Newsletter Signup

    Invalid email
    You have successfuly registered to our newsletter.
Thanks for your registration, follow us on our social networks to keep up-to-date